Sandingdrum Ø90mm

The Compromise between 80mm and 110mm

Sandingdrum Ø90mm

The 90mm sanding drum is a good compromise between 80mm and 110mm. It was specially developed for some countries in the world where this diameter is particularly in demand. With a 50mm hole, the sanding drum is suitable for continuous machines with a 50mm spindle.

The main body of the Nextools sanding drum is made of aluminum and is therefore particularly light and not susceptible to sticking to the shaft. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.

Each Nextools sharpening sanding drum is supplied with a 120 grit sanding sleeve.
Technical specifications

Diameter: 90mm

Bore: 50mm

Sanding Height: 120mm

Revolution: up to 3000

Weight: 0,6 Kg

Preferred use:
  • Spindle Moulder
  • CNC-Machine
  • Through-Feeding Machine

  • 2000
    Sanding Abrasive-Lifetime / Meter
    Sanding Sleeve Circumference / mm
    max Revolution

     Back  All Sandingdrums Next 

    Contact us

    +49 (0)5231 457956-0
    Plantagenweg 30
    32758 Detmold