Sandingdrum Ø80mm

The Allrounder

Sandingdrum Ø80mm

The 80mm sanding drum is a real all-rounder. It can be used on CNC machines for small inner radius as well as on table milling machines with high speeds. It is particularly suitable for a CNC machine or on table milling machines to sand curved workpieces.

The base body of the Nextools sanding drum is made of aluminum and is therefore particularly light and not susceptible to sticking to the shaft. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.

The Nextools sanding drum can also be optionally equipped with an HSK63F holder. Each Nextools sanding drum is delivered with a 120 grit sanding sleeve.
Technical specifications

Diameter: 80mm

Bore: 30mm | 1" | 1 ​¼"

Sanding Height: 120mm

Revolution: up to 3000

Weight: 0,6 Kg

Preferred use:
  • Spindle Moulder
  • CNC-Machine

  • 2000
    Sanding Abrasive-Lifetime / Meter
    Sanding Sleeve Circumference / mm
    max Revolution

     Back  All Sandingdrums Next 

    Contact us

    +49 (0)5231 457956-0
    Plantagenweg 30
    32758 Detmold