Loading...

Sandingdrum Ø110mm

One size for all applications

Sandingdrum Ø110mm

With the 110mm sanding drum we offer a real workhorse. It has the perfect diameter for a CNC machine and also for a table milling machine. The basic profile knobs are made longer and beveled at the tips. This special geometry leads to a particularly harmonious sanding result. The Nextools sanding drum can be used on CNC machines as well as on throughfeed and table machines.

The base body of the Nextools sanding drum is made of aluminum and is therefore particularly light and not susceptible to sticking to the shaft. The elastic rubber knobs are arranged helically with an offset of 5 °. In addition, the tips of the rubber knobs are chamfered by 5 °. This results in a particularly good sanding result, and the sanding sleeve is particularly tight and is secured against slipping.

To open the bayonet lock and change the sanding sleeve, a suitable hexagon key is included in the scope of delivery. Each Nextools sanding drum is delivered with a 120 grit sanding sleeve. The Nextools sanding drum can optionally be equipped with an HSK63F holder.
Technical specifications

Diameter: 110mm

Bore: 30mm | 1" | 1 ​¼"

Sanding Height: 120mm

Revolution: up to 3000

Weight: 1,5 Kg

Preferred use:
  • CNC-Machine
  • Spindle Moulder
  • Through-Feeding Machine




  • 2500
    Sanding Abrasive-Lifetime / Meter
    345
    Sanding Sleeve Circumference / mm
    3000
    max Revolution

     Back  All Sandingdrums Next 

    Contact us

    Phone
    +49 (0)5231 457956-0
    Address
    Plantagenweg 30
    32758 Detmold
    Germany